Відео

Nice video; of there a repository of community maps? I usually play the void since it’s spareness performs better.

I just want a whoop for inside in the winter can I buy the ELRS version ? I always fly FPV with DJI air units and controllers but I can’t get around the weight so o was thinking if I get the analog converter that snaps on the side of my DJI goggles and an analog controller then I can it to work

where we can find more video about edge companion ?

pls guide , special function we can use for , for example model no 1 , and that nothing to do with other model , and golable function work with all model , is that correct ? my english is not good hope you get my point .

excllent vide , love to watch part ,

Great videos they’re a huge help for me to setup my kit!

I came because I wondered whether to choose cc2500 or ELRS... I might end up with a few motorized gliders, Namely one BOT and one Jolly.

no way to set it to single cell?

what a cute british accent 😀

Can I bind it to the emax hawk sport that has D8

Hi think I need a driver not recognising my pocket

How to do factory reset (radiomaster pocket elrs)

Does tx16s bind to a futaba r30006sb?

Hi useful video series can you do a video on how to set up a timer for fixed wing use ? i can't find any info on the web

Thank you very much. Perfectly imperfect. 😂 I Love it.

thanks for your videos! one question: if i use telemetry screen for GPS Coordinates, i only get a "3-digits" number in telemetry screen. in the sensor list they displayed correctly. how can i change that?

Thanks again Bill!!

Could you give me some help? I would be very grateful. I sent an email to Radio Master and they did not answer me how to solve the problem. I updated my Radio Master Boxer model 4 in 1 to the latest version v2.10.3 but it is not as it was before. The Multiprotocol mode does not work. It no longer appears in the Ibus or Sbus settings. It also does not run the LRS folder or the scriptlua in the Sis folder. Some question marks appear.

This trick can be used to find a lost drone if it is still conected. Very useful. Thankyou.

Bill, thanks for the followup. Once I realized you were most likely not using elrs, and from what I picked up from RCgroups, it was a simple manner at avoiding channel five (arming only). It's all good for now. You have been a wonderful help and I appreciate the offer of assistance. It just might come to that down the road if need be. In the meantime, stay safe, well and keep up the bloody good work Sir!! From Joe (across the pond)

Hi Bill. I have been trying to use my boxer with the Lift Off Simulator. I have been through all of the calibration settings both for the boxer and with Lift Off. My pitch gimbal, right side is reversed. I have tried to invert in settings in the game but it does not seem to change anything. Any ideas please?

Thank you Brillant mate. 👏👏👏👏

Hi sir, I wonder if can help me on my sailboat winch setup. I’m using mode 2 so the throttle stick is on the left. This new servo I just received yesterday from Aliexpress is not responding to the lower sticker throw below zero on the control. It only move above zero on the stick. I hv no issue with other servo. Need your advice. Thanks.

This solves the problem I had. Thank you so much.

Hi phil quick question for you. I just brought the radiomaster tx16s 4in1 im flying edf jets which wing type meant to be 1aileron and 1flap setting but how can this be done on the tx16s ? Also how do i do a default reset as im deleted some items off my tx16s and need them back thanks

Wonderful video. One problem. I am dead in the water with getting both flaperons to operate correctly. Regardless of input direction (within the 5 channel Elrs receiver) or within the Boxer's outputs settings, and playing with variations on the +/- direction settings on the weights, the best I can do is get the left flaperon to behave correctly (lower), but the right flaperon deflects upwards. I know you're busy, but any help would be most appreciated. To facilitate any assistance you might be able to provide, I can provide you with the Companion file with all the settings contained therein. I was the individual who had said you were doing a "bloody good job Sir" from across the pond. Any help would be gratefully appreciated.

Hi Bill, thanks for the great video. I have two Turnigy TX's and decided to do the USBtiny installation on both of them. The first one loaded OpenTX without issues - and works perfectly. The second one (done by the same method) has a strange fault. Open TX loads and verifies correctly (using EEPE), but the MENU button doesn't function at all, so when OpenTX asks to do the stick calibration, this doesn't work. You can see that the potentiometer knob channel inputs work, but the sticks do not. I have actually checked the Momentary Push button (Normally Open, Closed when pushed) Switch under the MENU button, and it appears to be working properly. So I am flummoxed with this one. I have tried loading the OPENTX many times, with different options, but always the same result. Any ideas? The 9X that doesn't work is probably a bit newer than the one that does work OK. Thanks, Tim.

I love these videos. Thank you.

👍

Very helpful. Thank you. I just received my Pocket several days ago, and these videos are greatly appreciated.

Thank you.

Hi bill seperate from this video I have messed my inputs up I deleted a few n there messed up how do I fix this please cheers

Thank you, that's very helpful. Good job! Regards!

I still can't get mine to work... Every time I go to calibrate it, it completes but will not roll left.

Hi bikk its s qx95 nit 90 lol id got that wrong ok so in clean flight receiver channel map taer2234 and the chart erea were the channels are thats aert do i need it to be aert. taer1234 i have in the jumper channels i changed them n things worked better but probkem is my stick down it reads 1156 on thrittle i think with receiver its to be 1000 to arm got or 156 cant go lower so cant arm ha im useless but ill learnt bill getting stuck im not sure what to do be grateful for any help cheers bill i do appreciate your time helping me.

You have to warm to check the box by special settings of you forget that the switch wil do strange things

As always Sir, FANTASTIC!!! I initially used an earlier video to properly set up my Boxer for a dual servo aileron plane. I wasn't fully up to speed behind the steps, especially the logical switch setup and logic (when setting up important electric motor arming). This video began to start the process of "fleshing out" so-to-speak the process of understanding, which after all, is the most important aspect that one has to derive from your videos. Bloody well good job Sir! That's coming from "across the pond"!

Hello , can I set a sound to a external speaker ？

please make a video tutorial on how to update the recommended module how to flash the radiomaster boxer 4in1 multiprotocol module in edgetx i look forward to your feedback

I have one question ❓. I created a binding phrase on the ELRS configuration. Everything was successful and I went to plug in the RM Pocket and the SD card can't be read. I get error saying can't read SD content. Now I'm stuck again. My screen on elsr configuration is just like yours now but I can't load the new lus script without the SD card being read. What do I do now??

As always Bill, AWESOME! I've been a fixed wing pilot for years in the Spektrum arena and am transitioning all by aircraft to Elrs/Boxer. Loving the learning curve and your videos are just what the doctor ordered, so to speak. You also go into Boxer setup for drones that Joshua Bardwell typically (to the best of my knowledge) doesn't typically address. Thanks again!

Hi Bill I have just started up my Boxer. I have gone through the menus etc and I have copied the first programme in the list and assigned it to position 5. I want to use this for the Lift Off flight sim. I have been through the menu's to turn off the RF modules but I can't find them anywhere. I have watched your video and yours come up on page 2 but mine are nowhere to be seen. Any suggestions please?

Very useful, Bill. Thank you. The documentation for Radiomaster pocket is very poor/none... Your videos are really helpful.

AWESOME!!!!!!!!!

Thanks :) 👍👍👍

Hi Why change the toggle to 2pos doesn’t work in the hardware tab ?

i just got this controller, how did you get the trottle on the right stick

⚠️⚠️I accidentally flashed the firmware file "mm-stm-serial-aetr-air-v1.3.4.0.bin" to the internal module instead of the external module. Now, when I try to bind a receiver, it only binds to the internal module and not to the external module. I attempted to re-flash the firmware to the external module, but I received an error message: "FW update error, device not responding.⚠️⚠️, someone please help me to solve this problem 🙏

Hi can i add multiple model to my RM Pocket? I have the ELRS VERSION and have one mobula 8 binded and want to bind a tiny hawk 3 freestyle. I haven't built a binding phrase because o don't know how. Just been binding through CLI tabs. Please help me..?😢

Bill can you help me setup a qx90 to a jumper t lite I have bound but my channels wrong I think I dunno only 2 stick movements visible in clean flight if you'd be so kind cheers